STRONG: Capacity: 3800L/H,Power:1200W Max Suction Height: 7M; Max Height: 48M 3800LPH rating tackles any draining job at a fraction of the time.Electric Centrifugal Clear Water Pump designed to transfer water from tanks, pools, rain barrels, and ground water 4.8Bar water pressure makes this water pump perfect for irrig
STRONG: Capacity: 3800L/H,Power:1200W Max Suction Height: 7M; Max Height: 48M
3800LPH rating tackles any draining job at a fraction of the time.Electric Centrifugal Clear Water Pump designed to transfer water from tanks, pools, rain barrels, and ground water
4.8Bar water pressure makes this water pump perfect for irrigation or water transport or pump water. Ideal for ponds, pools, sprinkling systems, flow irrigation systems, gardening, rain barrels, large aquariums, use in agriculture settings, shallow and deep water wells.Automatic pumping when necessary.The pump is compatible with a tank and work as a well pump, also with a pressure regulator and work as a booster pump, and can be widely applied in garden and lawn.
Portable stainless steel with safe and convenient and Waterproof on/off switch and easy carry handle for portability
One Year Warranty! Ideal for the supply of fresh water to rural homes, farms, and cabins
The max suction height is 7m/23ft and it takes some time before automatic pumping.
Adding some pilotage water to the head of the pump will help accelerate the flow rate of inlet. The closer water inlet pipe and the pump is, the better the effect.
Impurities are not allowed in the water and there is a jam if the diameter is more than 1mm.
There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term. Water Inlet and outlet need to be sealed up when you connect pipes.
Material: Metal, Plastic
Weight: 11.5KG, Power: 1200W
Voltage/Frequency:240V/50Hz, Max pressure:4.8Bar
Max Flow Rate: 3800L/H
Max.head: 48m, Max suction level: 7m
1 x Water Pump
1 x User Manual
1.Before operation, make sure that the electric pump is properly grounded.
2.Do not run the electric pump without water.
Conditions for use
1.Medium temperature does not exceed +40℃;
2.PH value of medium is within the range of 6.5~8.5;
3.Volume ratio of solid-containing impurities in medium does not exceed 0.1%, particle size is not more than 0.2mm;
4.Refer to the parameters indicated on the nameplate;
5.The pump must be applied under the conditions indicated on the nameplate.
We Also Recommend