BACOENG DN20-9G 120W(0.16HP) Hot Water Circulating Pump 3/4'' NPT with Built-in Automatic Flow Switch Features: Specific Application - Max 30ft, directly used for shower pressurization; Or used with bridge valve to get hot water at every faucet within 2 seconds, eliminating wasted water and time(bridge valve not includ
BACOENG DN20-9G 120W(0.16HP) Hot Water Circulating Pump 3/4'' NPT with Built-in Automatic Flow Switch
- Specific Application - Max 30ft, directly used for shower pressurization; Or used with bridge valve to get hot water at every faucet within 2 seconds, eliminating wasted water and time(bridge valve not included). It has almost 0 suction. Not recommended for customers who have requirements for suction.
- Smart Flow Switch - Build in compact flow switch can save installation space; Also equipped with run-dry shut off protection;
- Three Working Modes - MANUAL/kept working; AUTO/only work when any tap is turned on; The switch mode can be adjusted by a knob on the black control box
- Main Technical - Power: 120W; Outlet: 3/4" NPT; Max Flow: 500GPH; Max Head: 30FT; 110V; Installation length:5.1"; Liquid temperature range:32 - 230℉
- Features & Material - Super silent, hardly feel it at work; Cast iron pump head, anti-fraying; High flow, low consumption.
- Model: DN20-9G
- Rated Power:120W (0.16HP)
- Outlet: 3/4" NPT
- Max Flow: 8GPM
- Rated Head: 9m(30FT)
- Volt/Freq: 110-120V/60Hz
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
- High efficiency, high flow, leak-tightness, low consumption
- Safer construction that can avoid leaks when installing external accessories. It is not only a water pump, but also a circulation system.
- Installed with a build in water pressure switch. Work automatically when open and close the tap. Moreover, If there is no water in the pipeline, the pump would automatically stop.
- Suitable for the medium: Hot water and ethanol maximum ratio of 1:1
- Performance: Liquid temperature range: 0℉ - +212℉Maximum working pressure 10bar.
- Ambient temperature: not higher than 40
- Voltage: 110-120V(±10%) ,Frequency: 60Hz.
- Motor: Protection class IP44 Insulation class F
- Material: Cast Iron, PP, ceramics
- Mounting position: Shaft horizontal mounting.
- Pump settings: 3 controlled single-phase motor is not overloaded. casting pump length 130 mm.
We Also Recommend